Component Technical Properties
The first feature of this reservoir is the ability to completely dismantle it piece by piece, separating especially the tubular main body in shock-resistant PVC to facilitate and simplify the periodic cleaning.
Since the tubular shape, as can be seen from the photos, the reference dimensions are the length of 340 mm and a diameter of 60 mm. The empty weight including caps is just below 800 grams. From the photos before you have surely wondered why the presence of two tubes, well the reason is the possibility of using the reservoir in two ways. Who has only one circuit can emphasize the aesthetic effect by inserting in the inner cylinder, hermetically sealed, a colored neon. While those who had 2 pumps and then 2 separate circuits can use both compartments as they are separated and sealed.
Even in the latter case, the aesthetic effect is always guaranteed by the 4-cylinder on the base cap that will be illuminated by the 4 LEDs inserted in the holes as in the photo.
On the base you can see both the small holes to accommodate the LED, both the larger holes of G ¼" on which the fittings will be connected. In the picture below, however, we observe the upper cap that goes to seal the tube and the two compartments.
Follow us in the next section relating to the assembly and disassembly.
